All Categories

Stitch duvet cover

If there's one thing we know, it's that duvet covers are a must-have in any home. They provide comfort, warmth, and style all at the same time. But what if you don't want to spend the money on a custom-made cover? No problem! You may make your own stitch duvet cover in just a few simple steps. Check out our instructions below to find out how.

What is a stitch duvet cover?

A stitch duvet covers is a form of bed cover created using stitches rather than an elastic band. The cover is constructed of a lightweight, breathable fabric that is readily removable for washing.

Why choose Ruholiving Stitch duvet cover?

Related product categories

How to sew a stitch duvet cover

Sewing a Stitch embroidered comforter and Duvet Cover


There is no one way to sew a thread duvet cover correctly. The cover will look and feel vary depending on the fabric, weight, and thread used. However, following these simple steps should get you off to a good start.


1. Begin by measuring the width and length of your duvet cover. This will assist you in determining the width of your seam allowance. A 1/2 inch seam allowance is usually sufficient.

2. Cut your fabric as directed by your pattern or lesson. Before moving on to step 3, ensure that the pieces are cut uniformly and that the edges are straightened.

3. Pin the fabric together along the long edge, making that the selvedge is properly aligned (this will help ensure a clean finish). Sew a zigzag stitch or similar strong thread down the edge, making sure to backstitch once or twice for extra strength.

4. Turn the cover right side out and use an iron to carefully eliminate any wrinkles or folds from Step 2.

5. Trim any excess fabric at each end of the cover with scissors or shears if desired (you may also want to serge it if using a seam binding tool).



What are the steps for making a stitch duvet cover?

This is a tutorial for making a stitch cover duvet insert or stitch duvet cover . The duvet cover is not as tough as you may imagine and can be completed in a matter of hours. All you need are some basic sewing supplies and some time.



1. Using the measuring tape, determine the circumference of your duvet cover.

2. Cut a piece of fabric to the size of your duvet cover's diameter.

3. Sew around the edge of the duvet cover, leaving a 1-inch opening at one corner, after pinning the fabric to the inside.

4. Turn the duvet cover right side out and iron or press it flat with a hot cloth.

5. Sew the opening at one corner closed, taking care not to strain the fabric too much while sewing.



How to wash and care for a stitch duvet cover

There are a few basic actions you can take to take care of your thread summer duvet cover. To begin, wash the cover on a gentle cycle with cold water and a small amount of detergent. If necessary, you can also spot clean. Before storing, carefully brush off any excess water. Finally, use a storage wrap or a dust cloth to shield the cover from light and dust.

Not finding what you're looking for?
Contact our consultants for more available products.

Request A Quote Now

Hot categories